Chisel Holder: Narex Richter 6pc - 3D Print STL File

This digital product is not a set of plans, but two .stl files for printing.

The clip is printed separately from the base so that the print line orientation can be different (the clip should be printed flat). The clip dovetails into the base and can be secured with CA glue, although it seems to be fine without any glue when tested.

There are countersunk holes modelled for #8 screws to secure the holder to a cleat to hang on the wall, but you can also opt to place the holder in a drawer without a cleat.

I used 3 walls with 20% infill when printing, but I'm sure it would be fine with 2 walls and 15% infill too.

After purchasing, an email will be sent (separate from the order confirmation email), with a link to access the STLs. You have five attempts to access and download the STLs to the local storage on your device. If you don't see the email after an hour, first check your spam folder, then fill out the form on the Contact page for customer assistance.

• 3D printer with minimum 225mm x 225mm print bed

• Minimum 175g of PLA or PET-G filament
• (Optional) Cleat to hang on wall
• (Optional) 3/4" #8 screws for cleat (x3)